NDP-80BP

Max. fluid temperature82 ℃ | 179.6 F

Valve typeBall

Maximum capacity800 liters/min (PTFE Diaphragm 580 L/min)

Port size80 mm | 3 "

Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)

Discharge Volume per Cycle8500 mL (PTFE Diaphragm 3800 mL / TU Diaphragm 5200 mL)

Maximum Cycles per MinuteRubber Diaphragm: 95 PTFE Diaphragm: 160

Maximum Size Solid10 mm or less

Maximum Dry Suction Lift5,0 m Rubber / 3,0 m PTFE Diaphragm

Body materialPolypropylane (PPG)

Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)

Air motorStandard: Aluminum

Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)

• NDP-80BPC                        K80D-PC, K80V-PC, K80-PC, K80-AMF, K40/50/80-AMS
• NDP-80BPN                       K80D-PN, K80V-PN, K80-PN, K80-AMF, K40/50/80-AMS
• NDP-80BPE                        K80D-PE, K80V-PE, K80-PE, K80-AMF, K40/50/80-AMS
• NDP-80BPH                       K80D-PH, K80V-PH, K80-PH, K80-AMF, K40/50/80-AMS
• NDP-80BPS                        K80D-PS, K80V-PS, K80-PS, K80-AMF, K40/50/80-AMS
• NDP-80BPV                       K80D-PV, K80V-PV, K80-PV, K80-AMF, K40/50/80-AMS
• NDP-80BPT                        K80D-PT, K80V-PT, K80-PT, K80-AMF, K40/50/80-AMS
• NDP-80BPTU                     K80D-PTU, K80V-PT, K80-PTU, K80-AMF, K40/50/80-AMS

Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.