DP – 10BS

Max. fluid temperature82 ℃ | 179.6 F

Valve typeBall

Maximum capacity20 liters/min

Port size10 mm | 3/8 "

Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)

Discharge Volume per Cycle50 mL

Maximum Cycles per Minute300

Maximum Size Solid1,0 mm or less

Maximum Dry Suction Lift1,0 m

Body materialStainless Steel (316)

Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)

Air motorStandard: Aluminum

Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)

• DP-10BSC                         K10D-MC / K10V-SC / K10-SC / K10-AM / K10-AMS
• DP-10BSE                         K10D-ME / K10V-SE / K10-SE / K10-AM / K10-AMS
• DP-10BSH                         K10D-MH / K10V-SH / K10-SH / K10-AM / K10-AMS
• DP-10BSN                         K10D-MN / K10V-SN / K10-SN / K10-AM / K10-AMS
• DP-10BSS                         K10D-MS / K10V-SS / K10-SS / K10-AM / K10-AMS
• DP-10BST                         K10D-MT / K10V-ST / K10-ST / K10-AM / K10-AMS
• DP-10BSV                         K10D-MV / K10V-SV / K10-SV / K10-AM / K10-AMS

Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.