DP – 10BA
Max. fluid temperature | 82 ℃ | 179.6 F |
Valve type | Ball |
For more information, see our available downloads below or contact us!
Contact usSpecifications of DP-10BA
82 ℃ | 179.6 F
Ball
20 liters/min
10 mm | 3/8 "
-
Max. fluid temperature82 ℃ | 179.6 F
Valve typeBall
Maximum capacity20 liters/min
Port size10 mm | 3/8 "
Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)
Discharge Volume per Cycle50 mL
Maximum Cycles per Minute300
Maximum Size Solid1,0 mm or less
Maximum Dry Suction Lift1,0 m
Body materialAluminum (ADC-12)
Diaphragm materialHytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)
Air motorStandard: Aluminum
-
Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)
- DP-10BAC K10D-AC / K10V-AC / K10-AC / K10-AM / K10-AMS
- DP-10BAE K10D-ME / K10V-AE / K10-AE / K10-AM / K10-AMS
- DP-10BAH K10D-AH / K10V-AH / K10-AH / K10-AM / K10-AMS
- DP-10BAN K10D-AN / K10V-AN / K10-AN / K10-AM / K10-AMS
- DP-10BAS K10D-AS / K10V-AS / K10-AS / K10-AM / K10-AMS
- DP-10BAT K10D-MT / K10V-AT / K10-AT / K10-AM / K10-AMS
- DP-10BAV K10D-MV / K10V-AV / K10-AV / K10-AM / K10-AMS
- DP-10BATU K10D-MTU / K10V-AT / K10-ATU / K10-AM / K10-AMS
Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.