NDP – 15BS

Max. fluid temperature82 ℃ | 179.6 F

Valve typeBall

Maximum capacity50 liters/min

Port size15 mm | 1/2 "

Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)

Discharge Volume per Cycle20 mL

Maximum Cycles per Minute400

Maximum Size SolidNo solids allowed (Slurry cannot be handled by a flat valve)

Maximum Dry Suction Lift1,0 m

Body materialStainless Steel (316)

Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)

Air motorStandard: Aluminum

Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)

• NDP-15BSC                         K15D-MC / K15V-SC / K15-MC / K10/15-AM / K10/15-AMS
• NDP-15BSE                         K15D-ME / K15V-SE / K15-ME / K10/15-AM / K10/15-AMS
• NDP-15BSH                         K15D-MH / K15V-SH / K15-MH / K10/15-AM / K10/15-AMS
• NDP-15BSN                         K15D-MN / K15V-SN / K15-MN / K10/15-AM / K10/15-AMS
• NDP-15BSS                         K15D-MS / K15V-SS / K15-MS / K10/15-AM / K10/15-AMS
• NDP-15BST                         K15D-MT / K15V-ST / K15-MT / K10/15-AM / K10/15-AMS
• NDP-15BSV                         K15D-MV / K15V-SV / K15-MV / K10/15-AM / K10/15-AMS
• NDP-15BSTU                      K15D-MTU / K15V-ST / K15-MTU /K10/15-AM / K10/15-AMS

Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.