NDP – 20BA
Max. fluid temperature | 82 ℃ | 179.6 F |
Valve type | Ball |
For more information, see our available downloads below or contact us!
Contact usSpecifications of NDP - 20BA
82 ℃ | 179.6 F
Ball
110 liters/min (PTFE Diaphragm 100 L/min)
20 mm | 3/4 "
-
Max. fluid temperature82 ℃ | 179.6 F
Valve typeBall
Maximum capacity110 liters/min (PTFE Diaphragm 100 L/min)
Port size20 mm | 3/4 "
Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)
Discharge Volume per Cycle350 mL, (PTFE Diaphragm 240 mL)
Maximum Cycles per MinuteRubber diaphragm: 195 PTFE diaphragm: 195
Maximum Size Solid2,0 mm or less
Maximum Dry Suction Lift3,0 m
Body materialAluminum (ADC-12)
Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)
Air motorMetal pumps standard with aluminum motor Plastic pumps standard with PPG motor
Air motor option Teflon-coated, Electroless Nickel Plated for aluminum motor only
-
Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)
- NDP-20BAC K20D-MC / K20V-AC / K20-MC-1*/ K20/25-AM / K20/25-AMS
- NDP-20BAE K20D-ME / K20V-AE / K20-ME-1* / K20/25-AM / K20/25-AMS
- NDP-20BAH K20D-MH / K20V-AH / K20-MH-1 / K20/25-AM / K20/25-AMS
- NDP-20BAN K20D-MN / K20V-AN / K20-MN* / K20/25-AM / K20/25-AMS
- NDP-20BAS K20D-MS / K20V-AS / K20-MS-1 / K20/25-AM / K20/25-AMS
- NDP-20BAT K20D-MT / K20V-AT / K20-MT-1 / K20/25-AM / K20/25-AMS
- NDP-20BATU K20D-MTU / K20V-AT / K20-MTU-1 / K20/25-AM / K20/25-AMS
- NDP-20BAV K20D-MV / K20V-AV / K20-MV-1* / K20/25-AM / K20/25-AMS
*Only suitable for Air chamber ≥2011 with O-ring groove
-
- Also available for all pump-models: K20/25-AMN (Air Motor Kit Dry Air)
Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.