NDP-25BA
Max. fluid temperature | 82 ℃ | 179.6 F |
Valve type | Ball |
For more information, see our available downloads below or contact us!
Contact usSpecifications of NDP-25BA
82 ℃ | 179.6 F
Ball
160 liters/min
25 mm | 1 "
-
Max. fluid temperature82 ℃ | 179.6 F
Valve typeBall
Maximum capacity160 liters/min
Port size25 mm | 1 "
Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)
Discharge Volume per Cycle600 mL, (PTFE Diaphragm 500 mL)
Maximum Cycles per MinuteRubber diaphragm: 148 PTFE diaphragm: 270
Maximum Size Solid3,0 mm or less
Maximum Dry Suction Lift5,0 m Rubber / 2,0 m PTFE Diaphragm
Body materialAluminum (ADC-12)
Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
Santoprene (S)
Viton (V)
Air motorMetal pumps standard with aluminum motor Plastic pumps standard with PPG motor
Air motor option Teflon-coated, Electroless Nickel Plated for aluminum motor
-
Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)
- NDP-25BAC K25D-MC, K25V-AC, K25-MC-1*, K20/25-AM / K20/25-AMS
- NDP-25BAE K25D-,ME K25V-AE, K25-ME-1*, K20/25-AM / K20/25-AMS
- NDP-25BAH K25D-MH, K25V-AH, K25-MH-1, K20/25-AM / K20/25-AMS
- NDP-25BAN K25D-MN, K25V-AN, K25-MN-1*, K20/25-AM, K20/25-AMS
- NDP-25BAS K25D-MS, K25V-AS, K25-MS-1, K20/25-AM / K20/25-AMS
- NDP-25BAT K25D-MT, K25V-AT, K25-MT-1, K20/25-AM, K20/25-AMS
- NDP-25BATU K25D-MTU, K25V-AT, K25-MTU-1, K20/25-AM, K20/25-AMS
- NDP-25BAV K25D-MV, K25V-AV, K25-MV-1*, K20/25-AM, K20/25-AMS
- Also available for all pump-models: K20/25-AMN (Air Motor Kit Dry Air)
* Only suitable for Aluminum Air chamber 2011 with O-ring groove and PPG motor
Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.