NDP-80BS
Max. fluid temperature | 82 ℃ | 179.6 F |
Valve type | Ball |
For more information, see our available downloads below or contact us!
Contact usSpecifications of NDP-80BS
82 ℃ | 179.6 F
Ball
840 liters/min (PTFE Diaphragm 640 L/min)
80 mm | 3 "
-
Max. fluid temperature82 ℃ | 179.6 F
Valve typeBall
Maximum capacity840 liters/min (PTFE Diaphragm 640 L/min)
Port size80 mm | 3 "
Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)
Discharge Volume per Cycle8500 mL (PTFE Diaphragm 3800 mL / TU Diaphragm 5200 mL)
Maximum Cycles per MinuteRubber Diaphragm: 95 PTFE Diaphragm: 160
Maximum Size Solid10 mm or less
Maximum Dry Suction Lift5,0 m Rubber / 3,0 m PTFE Diaphragm
Body materialStainless Steel (316)
Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)
Air motorStandard: Aluminum
-
Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)
- NDP-80BSC K80D-MC, K80V-MC, K80-MC, K80-AMF, K40/50/80-AMS
- NDP-80BSN K80D-MN, K80V-MN, K80-MN, K80-AMF, K40/50/80-AMS
- NDP-80BSE K80D-ME, K80V-ME, K80-ME, K80-AMF, K40/50/80-AMS
- NDP-80BSH K80D-MH, K80V-MH, K80-MH, K80-AMF, K40/50/80-AMS
- NDP-80BSS K80D-MS, K80V-MS, K80-MS, K80-AMF, K40/50/80-AMS
- NDP-80BVS K80D-MV, K80V-MV, K80-MV, K80-AMF, K40/50/80-AMS
- NDP-80BST K80D-MT, K80V-ST, K80-MT, K80-AMF, K40/50/80-AMS
- NDP-80BSTU K80D-TU, K80V-ST, K80-TU, K80-AMF, K40/50/80-AMS
Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.