NDP – P25BV

Max. fluid temperature100 ℃ | 212 F

Valve typeBall

Maximum capacity160 liters/min

Port size25 mm | 1 "

Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)

Discharge Volume per Cycle600 mL, (PTFE Diaphragm 500 mL)

Maximum Cycles per Minute210

Maximum Size Solid3,0 mm or less

Maximum Dry Suction Lift5,0 m Rubber / 2,0 m PTFE Diaphragm

Body materialKynar® (PVDF)

Diaphragm materialEPDM (E)
Hytrel® (H)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)

Air motorMetal pumps standard with aluminum motor Plastic pumps standard with PPG motor

Air motor option Teflon-coated, Electroless Nickel Plated for aluminum motor

Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)

• NDP-P25BVE                         KP25D-ME*, KN25V-VE, K25-VE-1*, KP20/25-AM / KP20/25-AMS
• NDP-P25BVH                        K25D-PH-1, KN25V-VH, K25-VH, KP20/25-AM / KP20/25-AMS
• NDP-P25BVS                        K25D-PS-1, KN25V-VS, K25-VS, KP20/25-AM / KP20/25-AMS
• NDP-P25BVT                       K25D-PT, KN25V-VT, K25-VT, KP20/25-AM, KP20/25-AMS
• NDP-P25BVTU                      K25D-PTU, KN25V-VT, K25-VTU, KP20/25-AM / KP20/25-AMS
• NDP-P25BVV                        KP25D-VV*, KN25V-VV, K25-VV-1*, KP20/25-AM, KP20/25-AMS

* Only suitable for Aluminum Air chamber 2011 with O-ring groove and PPG motor

Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.