NDP – P25BS

Max. fluid temperature82 ℃ | 179.6 F

Valve typeBall

Maximum capacity160 liters/min

Port size25 mm | 1 "

Air Supply Pressure2 - 7 bar (0.2 - 0.7 MPa)

Discharge Volume per Cycle600 mL, (PTFE Diaphragm 500 mL)

Maximum Cycles per Minute210

Maximum Size Solid3,0 mm or less

Maximum Dry Suction Lift5,0 m Rubber / 2,0 m PTFE Diaphragm

Body materialStainless Steel (316)

Diaphragm materialEPDM (E)
Hytrel® (H)
NBR (N)
Neoprene (C)
PTFE (T)
PTFE/EPDM (TU)
Santoprene (S)
Viton (V)

Air motorMetal pumps standard with aluminum motor Plastic pumps standard with PPG motor

Air motor option Teflon-coated, Electroless Nickel Plated for aluminum motor

Available kits (Diaphragm / Valve / Wet End Repair / Air Motor / Air Motor Seal)

• NDP-P25BSC                       KP25D-MC*, K25V-SC, K25-MC-1*, KP20/25-AM, KP20/25-AMS
• NDP-P25BSE                         KP25D-ME*, K25V-SE, K25-ME-1*, KP20/25-AM / KP20/25-AMS
• NDP-P25BSH                        K25D-MH, K25V-SH, K25-MH-1, KP20/25-AM / KP20/25-AMS
• NDP-P25BSN                        KP25D-MN*, K25V-SN, K25-MN-1*, KP20/25-AM / KP20/25-AMS
• NDP-P25BSS                        K25D-MS, K25V-SS, K25-MS-1, KP20/25-AM / KP20/25-AMS
• NDP-P25BST                       K25D-MT, K25V-ST, K25-MT-1, KP20/25-AM, KP20/25-AMS
• NDP-P25BSTU                      K25D-MTU, K25V-ST, K25-MTU-1, KP20/25-AM / KP20/25-AMS
• NDP-P25BSV                        KP25D-MV*, K25V-SV, K25-MV-1*, KP20/25-AM, KP20/25-AMS

* Only suitable for Aluminum Air chamber 2011 with O-ring groove and PPG motor

Please note if you have a special pump or add-on, it’s possible you also need a special provided kit. Contact us for your options.